I’m not very good at writing in depth reports or things like that, this blog / site is purely like a diary for me and hopefully you enjoy reading it – so please don’t expect to read below and find the answers to your digital / Linux problems… its not that kind of post… its just some passing thoughts and more so, a message of thanks to those that imparted their wisdom and got me up and running, its about my new Icom IC-7300, a new operating system (Linux Mint) and the connection of the radio to the computer… it wont be technical as my brain hasn’t retained much about how I did it but it will be a bit about the problems I faced.
Note to Icom – supply the IC-7300 with a USB cable please! The printer type USB cable needed to connect the radio to the computer isn’t in the box and only because Peter @2m0sql (thanks Pete) told me beforehand ‘sort one so as not to be disappointed’ was I not – I had to have a good hunt around but luckily I had one at work in a ‘junk’ box, as you would expect 😉
Now I had the cable it was time to connect the computer – for whatever reason my Windoze 7 install was corrupt (had been for almost a year) and I was unable to install any USB drivers so it wouldn’t read / write to a USB stick or anything, I couldn’t even install a Microsoft web-cam.
Reading up on the internet Windows needed a clean install… after I had the problems the first time finding drivers for the motherboard I wasn’t going to do that… So my plan was to dual boot and install Linux because I wasn’t ready for a cold turkey approach to the MS withdrawal – however the Windows install was that bad the Linux distro (Mint 17.1 – why 17.1? just because it was a CD that was lying around, no other reason) didn’t recognise there was another operating system and wouldn’t install as a dual boot – because I wasn’t ready to format the drive I found another one and did a clean install on a separate 150GB HDD – other than dipping back for LoTW stuff I haven’t been back to Win7 which hopefully is a good sign…
So here goes nothing – the learning curve was extremely acute, not only a change in operating system but all the software that goes with it.. luckily being only 18 months in to my ham radio journey I hadn’t been too brainwashed in to certain software so learning anything new when it came to digital was going to be another struggle anyway. If I was going to do something new then it wouldn’t matter what OS I was using…
Oh hell… little bits and bobs I had problems with, its not like windows where you just download an .exe file and install it… its much more convoluted – that being said, that’s probably just me being new to Linux… when I understand the process it will probably be easier, I hope it is anyway…
Then the struggle I had with LoTW certificates – I didn’t realise you can back up your ‘working’ version of “TrustedQSL” (TQSL) and then use that to move to another computer – I would STRONGLY recommend you set up a Dropbox account or similar and backup your logs and TQSL directly to it so you don’t ever run the risk of losing stuff or requesting new certificates from the ARRL… in fact all my radio stuff is on a Dropbox account for that very reason… my computer may crash but I wont loose my data 🙂
I need to thank a load of people (tweeps) at this point as this post, as above, is really to thank them, without their help & comments etc I’d have probably fallen back to Windows.. If I have missed anyone I’m really sorry, but it doesn’t negate your input… its been really good of everyone to point me in the right direction and also to spend their time explaining things and answering my dumbarse questions.
(4 x Daves – that’s scary!!)
Moving forward… the IC-7300 is now connected to the computer that’s running Linux.
Now that I’ve been helped this far to get the set up right what’s next……..?
I know lets install WSJT-X and try this new FT8 everyone has been talking / raving about – strangely I find myself hooked – I never thought I would say that – spare ‘radio time’ is now spent on FT8 at the same time as surfing the web (in fact part of this post was written whilst making FT8 QSO’s), it’s one of those modes you can almost leave and let it work the DX itself (but not quite) – it does require a little human intervention but not much… I’ve found the propagation of FT8 not dissimilar to SSB on a good day (at current solar conditions) and FT8 is also right up the street of those 59/QRZ types – its not conversational at all and I’m even quite enjoying that quick exchange.
I have particularly enjoyed the propagation reports from PSK Reporter when using FT8 – a very clever tool and in good ham tradition its a hobby project and completely free – the PSK Reporter maps are amazing!! Take a look if you are thinking of playing digital modes or are new to them, its well worth it! You can see who is hearing who or where you are being heard. You can call CQ and almost immediately get reports coming back through the system.
I’ve briefly tried JT65 – that is painfully slow… I don’t get that… far too long winded… I’ve also tried to get FLDigi to work but some settings are slightly different on the radio I think, I seemed to get it to work but didn’t manage any QSO’s and then visited it again a week or so later and couldn’t receive / decode anything.
Next stop SSTV (if I can get myself off FT8) 😉
UPDATE: 12th June 2018
Bob, KD2BOB asks some questions below in the comments about setting up Mint and WSJT-X… hopefully the images and link below helps…
and then below you need to set up your IC-7300… follow the link for the basic settings…. you will have to tweak them – one important point…
GOOD LUCK! – please let me know how you get on!